B-Quiet Sound Deadening 11 Piece Trim Removal tool set with Carrying Case - B-Quiet

Juego de herramientas de extracción de molduras B-Quiet Sound Deadening de 11 piezas con estuche de transporte

Precio habitual $24.19 Precio de oferta$19.35 Guardar 20%
/
Los gastos de envío se calculan en la pantalla de pagos.
  • En stock
  • Inventario en el camino
  • Envío gratuito a Lower 48 en pedidos superiores a $ 80
  • Ahorre 10% en pedidos superiores a $200

Envío en América del Norte

EE. UU.: Envío económico gratuito en todos los pedidos superiores a $80 con UPS o Fedex en los EE. UU. continentales. 5-7 días

El envío exprés de 2 a 3 días está disponible por una tarifa adicional dependiendo de su destino

Canadá: Tarifa fija de envío de $20 en todos los pedidos y B-Quiet Pays Duties

México: Tarifa fija de envío de $50 por pedido

Todos los pedidos se envían desde nuestro almacén de Colorado. Los pedidos recibidos antes de las 2:00 p. m. de lunes a viernes se enviarán ese día; todos los pedidos recibidos después de las 2:00 p. m. se enviarán el siguiente día hábil.

Envío internacional

Ofrecemos envíos internacionales. Consulte si su dirección no figura en el momento del pago con service@b-quiet.com.

Este sitio está protegido por reCAPTCHA y se aplican la Política de privacidad de Google y los Términos del servicio.

B-Quiet Sound Deadening Juego de herramientas de extracción de molduras de 11 piezas con estuche de transporte

Si está cansado de rayar las piezas de plástico y pintadas, aquí está la respuesta: nuestro juego de herramientas para quitar molduras de 11 piezas le ahorrará tiempo y frustración al quitar piezas de molduras difíciles.

1. Eficaz para todos los adornos por dentro y por fuera.
2. Fácil extracción de sujetadores de molduras, molduras y cubos de ruedas.
3. Hace que la extracción de molduras, clips de tornillos, tapizados y accesorios de su vehículo sea fácil e indoloro.
4. No utilice más un destornillador de cabeza plana que dañará el panel o la moldura.
5. Hecho de una mezcla especial de nailon y fibra de vidrio que no raya para garantizar que no se dañe el panel en el área extraída del vehículo.
6. Una herramienta imprescindible en cualquier caja de herramientas

Contenido:

Removedor de tipo ancho
Removedor tipo tirar
Removedor práctico
Removedor de tipo estrecho
Removedor de tapicería
Removedor de clips en ángulo
Removedor de panel de clip plano con punta de horquilla
Removedor de panel de clip
Removedor de panel de clip plano con punta afilada
Removedor de paneles
Removedor de panel de clip plano con punta roma

Customer Reviews

Based on 244 reviews
88%
(215)
11%
(26)
1%
(3)
0%
(0)
0%
(0)
T
Tom Guenther
V comp mass loaded vinyl vanagon

Covered the front wheel wells and arches in a vanagon. Used some ultimate and complete coverage with mass loaded vinyl, Huge drop in road noise.

D
Donald Dean
Very good product

Good

L
Layton
Great product

I did up the cab of my 89 Toyota and it went from a tin can to a modern sounding vehicle. Will buy again for future projects.

M
Mark Irving
Van engine cover

I have a 1996 Ford E-350 with the 7.3 Powerstroke Diesel that is LOUD. The engine noise cuts right through the engine cover (doghouse) and right into the cab. It’s so bad that when I’m accelerating to get on the highway or even just cruising highway speed that it’s difficult to think, let alone carry on a conversation. It’s bad enough that if I’m alone in the cab I usually put in ear plugs.

As a first step of deadening the sound I reached out to the B-Quiet team with a few questions and they gave me some good pointers. From there I purchased the B-Quiet Ultimate and the HLiner. I removed the original cheap insulation and installed 2 layers of the Ultimate (probably only needed 1, but it I don’t regret adding a second) and then the HLiner. The before and after comparison is drastic and I can finally drive around with the family.

To say that I’m happy is an understatement. I will absolutely be buying more from B-Quiet when I sound deaden my floors, doors, and wheel wells.

M
Matt W
helpful not awesome

I used the side x side sound deadening package on my KRX 1000. The package dead help considerably. The engine sound went from ear piercing to communicating with passenger with a raised voice .
A better installation instruction would have been helpful with installation tips. I had to come up with my own attachment method for the vinyl backed sound deadening materials. The method worked very well. When asked the company for tip on installing the vinyl backed material they did not respond.
The vinyl backed material is brittle and tears easily. They sent barely enough sound deadening product for engine side of firewall. Would have been nice to have additional sound deadening material for use under the seats on the engine side of firewall. Reality is additional sound deadening would not be much more effective as the sound is coming around the firewall through rear windshield and in through side window areas.
The sound deadening material used on engine side of firewall is not adhering as well as I had hoped even after cleaning with acetone.
Overall I am satisfied with the products and sound deadening function of the system.
I would not consider this a kit specific to a machine. I would consider it a couple of products grouped and sold together.


Visto recientemente